Master 880 Verso MP

The latest version of the Master 880, the Verso, is a unique and versatile machine which can function at the very highest speeds while also offering maximum flexibility in production.


The polyurethane guides and front bush that support the bar allow extremely high rotation speeds to be reached, guaranteeing a turned product with an excellent surface finish.


The snap-in polyurethane guides and other equipments on the Master Verso allow you to machine a wide range of bar diameters using the same channel, or to switch to another configuration in just a few minutes.


The precision design and build of the Master Verso ensure the very highest levels of torsional and longitudinal rigidity, eliminating all vibration.


If the machine has to be reconfigured, the time required for the complete operation is as short as 8 minutes, thanks to new software and to the introduction of three quick-fit systems.


The front bush accurately guides the bar between the feeder and the lathe, eliminating all vibration. The time needed to replace the two half-bushes is less than 30 seconds.


The round section guide channels are fully closed and lubricated and can be completely replaced without tools in less than 2 minutes. Guides are also guaranteed interchangeable with previous guides.


The knife group that introduces the bar into the fingers is self-centering. Thanks to this, no adjustment is needed by the operator when bar size changes.


The magazine is available in three different versions, making the feeder easily adaptable to different product type.


This is a single level magazine with centralised adjustment. Maximum capacity is about 320 mm, equivalent to 5 bars of 60 mm (360 Kg max).

Technical Specifications
Round bars Ø 8 – 80 mm
Hexagonal bars 7 – 65 mm
Magazine capacity 270:320 mm (max 360 Kg)
Bar changing time 30 sec.
Feed speed 150 mm/sec. (adjustable)
Return speed 950 mm/sec
Feed voltage 230/400 volt
Compressed air 6 bar
Bar feeder weight Mod.33 – 1360 Kg
Mod.38 – 1440 Kg
Mod.43 – 1520 Kg