 |
|---|
 Pnuematic/Hydraulic Front End Chucks, Control Units - SMW Autoblok
|
|||||
 |
SP® + SP-ES + SP-L |  |
BIG BORE® | ||
|---|---|---|---|---|---|
| INCH serration | INCH serration | ||||
| Pneumatic power chucks Ø 125 - 350 mm • large through-hole – self contained pneumatic cylinder • 3 jaws • SP-ES: chuck with rapid and clamping stroke • SP-L: chuck with long jaw stroke more... |
Front-end pneumatic power chucks with extra large through-hole Ø 140 - 534 mm • standard jaw stroke • 3 jaws more... |
||||
 |
BIG BORE® ES |  |
BIG BORE® BBU-AZ-ES | ||
| INCH serration | INCH serration | ||||
| Front-end pneumatic power chucks with extra large through-hole Ø 140 - 560 mm • extended jaw stroke • 3 jaws more... |
Front-end pneumatic power chucks with extra large through-hole Ø 220 - 365 mm • self centering or compensating clamping • extended jaw stroke • 3 jaws more... |
||||
 |
CC |  |
HYND-S | ||
| INCH serration | INCH serration | ||||
| Stationary centering and dampening chuck Ø240 - 350mm • integrated dampener • 3 jaws more... |
Power chucks with built-in hydraulic cylinder Ø 180 - 315 mm • Front-mount, self-contained hydraulic chuck • 3 or 4 jaws more... |
||||
 |
HYD-S / HYDL-S / HYDLL-S | ||||
| INCH serration | |||||
| Power chucks with built-in hydraulic cylinder Ø 400 - 800 mm • Front-mount, self-contained hydraulic chuck • 3 jaws more... |
|||||
WORKHOLDING BY GROUP
Manual ChucksClosed Centre Power ChucksOpen Centre Power ChucksQuick Jaw Change ChucksPull Down, Compensating, Indexing, Shaft and Column ChucksDiaphragm ChucksCollet ChucksManual or Power Operated Expanding MandrelsCylinders - Closed Centre, Open Centre & DoublePnuematic/Hydraulic Front End Chucks, Control UnitsSelf-Centring Steady RestsStatic Chucks Pnuematic/Hydraulic, Bar Pulling ChucksChuck Adapters, Clamping Jaws, T-Nuts & Other AccessoriesScroll over images to view name, click to enter section
|
||||||
 |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
 |
|
