Choose a type of Workholding... Manual Chucks Closed Centre Power Chucks Open Centre Power Chucks Quick Jaw Change Chucks Pull Down, Compensating... Diaphragm Chucks Collet Chucks Manual/Power Mandrels Cylinders - Closed/Open/Double Front End Chucks Steady Rests Static Chucks Workholding Accessories

Pull Down, Compensating, Indexing, Shaft, Column Chucks - SMW Autoblok
	TSF-C	TSR-C		TSF-C
	Self centering floating jaws	Self centering rigid jaws		Self centering floating jaws
	Pull-down chucks Ø 170 - 650 mm • active pull-down • tongue & groove base jaws • proofline™ = sealed chucks – low maintenance • 3 jaws more...			Pull-down chucks Ø 210 - 315 mm • active pull-down • tongue & groove base jaws • proofline™ = sealed chucks – low maintenance • 2 jaws more...
	TSF-RM	TSR-RM		TSF-CP	TSR-CP
	Self centering floating jaws	Self centering rigid jaws		Compensating floating jaws	Compensating rigid jaws
	Quick jaw change pull-down chucks Ø 170 - 530 mm • QUICK JAW CHANGE WITH PALLETS • active pull-down • tongue & groove pallets • proofline™ = sealed chucks – low maintenance more...			Compensating pull-down chucks Ø 170 - 530 mm • active pull-down • tongue & groove pallets • proofline™ = sealed chucks – low maintenance • 3 jaws more...
	TSF-CP			FRC-N
	Compensating floating jaws			Compensating jaws
	Compensating pull-down chucks Ø 210 - 315 mm • active pull-down • tongue & groove pallets • proofline™ = sealed chucks – low maintenance • 2 jaws more...			Compensating rigid jaws Leveler Chuck Ø 215 - 365 mm • large compensating stroke • pull down • center point adjustable • tongue & groove more...
	FRS			TPT-C
	Compensating jaws			2+2 independent jaw movement, tongue & groove
	Self centering rigid jaw chucks Ø 215 - 365 mm • large though-hole • tongue & groove • pull down • proofline™ = sealed chucks = fully sealed, low maintenance more...			High Precision power chucks Ø 210 - 400 mm • closed center • with tongue & groove master jaws more...
	AXN			W
	Automatic indexing chuck			Shaft chuck with face driver
	Automatic indexing chucks Ø 205 - 680 mm • hydraulic clamping and indexing • divisions: 4 x 90° / 8 x 45° / 3 x 120° / 6 x 60° or specials • proofline™ = sealed chucks – low maintenance • 2 jaws more...			Shaft turning chucks Ø 215 - 325 mm • compensating or self-centering clamping • quick change for jaws and face driver • retractable jaws via retractable jaw carrier • complete machining of shafts in one setup more...
	GSA			ACS
	Shaft chuck with face driver			Self centering column chucks
	Shaft turning chucks Ø 200 - 320 mm • compensating jaws retractable by movement of master jaws • complete machining of shafts in one set-up • built-in power operated/spring loaded face driver • line™ = sealed chucks – low maintenance more...			Pull-down chucks Ø 130 - 254 mm • for external clamping ACS-E • for internal clamping ACS-I • 3 and 6 jaws (ACS-E only) more...

 WORKHOLDING BY GROUP

Manual Chucks Closed Centre Power Chucks Open Centre Power Chucks Quick Jaw Change Chucks Pull Down, Compensating, Indexing, Shaft and Column Chucks Diaphragm Chucks Collet Chucks Manual or Power Operated Expanding Mandrels Cylinders - Closed Centre, Open Centre & Double Pnuematic/Hydraulic Front End Chucks, Control Units Self-Centring Steady Rests Static Chucks Pnuematic/Hydraulic, Bar Pulling Chucks Chuck Adapters, Clamping Jaws, T-Nuts & Other Accessories Scroll over images to view name, click to enter section